AD6NF9
I2O Ready Dual Pentium Pro Motherboard

Processor
Single or Dual Pentium Pro Processor at 180 or 200MHz
Two socket 8s

Chipset
Intel 440FX Natoma PCIset with I/O APIC

Onboard Intelligent I/O Processor
Intel i960rp-33 RISC Processor
Ready for an i960rp-66 (Kaibab) Processor
Firmware in 2MBit of embedded flash EPROM
Up to 256MB of local memory for i960 processor
Ready for I2O compliant HDMs: i.e. RAID HDM

L2 Cache
CPU built-in 256KB or 512KB

System Memory
Memory Capacity: 1GB
Memory Sockets: Four 72-pin SIMMs and two 168-pin DIMMs
Memory Type: FPM or EDO
Data Integrity: ECC (Error Checking and Correction) or Parity

Onboard I/O
SMC 665 with:
1 Floppy Controller (2.88MB support)
2 Serial Ports (16550 UART compatible)
1 Parallel Port (ECP/EPP)
IrDA* Header (manufacturing option)
* Requires an SMC 665Ir

Onboard IDE
2 Channels of Bus Master IDE ports for up to four devices
PIO Mode 3 and 4 for up to 16.7MB/Sec
DMA Mode 2 for up to 22MB/Sec

USB Ports
Two onboard USB headers

Onboard Display
S3 765 with 1MB of memory, expandable to 2MB
VGA feature connector

H/W Monitoring
Onboard 26-pin header for a TMC H/W monitoring card
The H/W monitoring card provides:
ASR (Automatic Server Restart)
Temperature Monitoring
Fan failure Detection
Voltage Monitoring

BIOS
1Mbit flash EPROM
Plug and Play add-in card support
DMI support
APM 1.2
Integrated SCSI BIOS to support: Symbios 53C810 or Adaptec AIC-7850

Expansion Slots
Four Intelligent PCI slots
Three Primary PCI slots
Two 16-bit ISA slots

Board Size
Full AT Form Factor

?



Back to Product Line


Back to Home Page
Copyright 1996 Taiwan Mycomp Co, Ltd. All Rights Reserved. Pentium and Pentium Pro are registered trademarks of Intel Corp. All other product and brand names are trademarks and/or registered trademarks of their respective companies.